IC Controller / LED Display (220V)
|Model No.||C-239-2 (For 220V)|
|Description||LED Display IC Controller (Water quality will be detected automatically)|
|Size||(L)35mm x (W)125mm x (H)100mm|
|Specification||It will wash automatically for 45 seconds when it used at the first time ; it will not work if its supply pressure is inadequate.
When the power is on, the red light is on. (Red light represents power)
Importing water detection (green light): When the water comes, switched on the low pressure switch delays for 5 seconds.
When the source water is on, the green light is on. (Green light represents source water)
When the green light is on, the pump starts to produce water and the red light is on.
Full water detection(green light): When water is full the high pressure switch delays for 5 seconds.
The pump will stop producing water, red light is off; green light is on.
Auto wash (yellow light):
It will wash automatically for 45 seconds when the pressure tank is full.
[FLUSH] yellow light
[TANK FULL] green light
[POWER] red light
[Producing Water] 4 red light on at the same time.
Reaction of pump (red light): It can shine when producing water.
Water quality: Detecting range produce water ratio 85% ±5% CLEAN. 00-04 ppm shown on the LED is the normal range; if the water quality is more than 04 ppm, the LED will show 99 ppm and keep shining red light on the LED, means please replace the RO Membrane.
Notice: The detecting of water quality is normal according to formal producing water. It should be wipe with alcohol per 3 ~ 4 month.